odroid 부팅로그를 copy-n-paste 했습니다.

가끔 볼일이 있을 것 같아서

 OK
 
U-Boot 1.3.4-dirty (Jul 30 2010 - 00:08:42) for HKDKC100
 
 
CPU:     S5PC100@666MHz
         Fclk = 1332MHz, Hclk = 166MHz, Pclk = 66MHz, Serial = PCLK 
Board:   HKDKC100
I2C:   ready
DRAM:    512 MB
SD/MMC:  1887 MB 
*** Warning - using default environment
 
In:      serial
Out:     serial
Err:     serial
Hit any key to stop autoboot:  0 
Reading kernel from sector 3853262 (8192 sectors).. completed
Boot with zImage
 
Starting kernel ...
 
Uncompressing Linux................................................................................
Linux version 2.6.29 (c@ckkim-desktop) (gcc version 4.2.2) #1 Mon Feb 22 19:06:20 KST 2010
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: HKDKC100
Memory policy: ECC disabled, Data cache writeback
CPU S5PC100 (id 0x43100000)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S5PC100: PLL settings, A=1332000000, M=267000000, E=67500000, H=24000000
S5PC100: ARMCLK=666000000, Hl (1), rate is 1332000000
mout_epll: source is fout_epll (1), rate is 67500000
mout_mpll: source is mpll (1), rate is 267000000
mout_hpll: source is srclk (1), rate is 24000000
mmc_bus: source is dout_mpll (1), rate is 44500000
mmc_bus: source is dout_mpll (1), rate is 66750000
mmc_bus: source is dout_mpll (1), rate is 66750000
usb-host-bus: source is dout_mpll (1), rate is 133500000
uclk1: source is dout_mpll (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_spi: source is dout_mpll2 (1), rate is 66750000
sclk_audio: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is mout_epll (0), rate is 67500000
audio-bus: source is fout_epll (0), rate is 67500000
sclk_irda: source is dout_mpll (1), rate is 133500000
sclk_pwi: source is srclk (0), rate is 0
sclk_fimd: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_fimc: source is dout_mpll (1), rate is 133500000
sclk_mixer: source is clk_27m (0), rate is 27000000
s5pc1xx: 6291456 bytes system memory reserved for fimc0 at 0x20799000
s5pc1xx: 6291456 bytes system memory reserved for fimc1 at 0x20d99000
s5pc1xx: 1843200 bytes system memory reserved for fimc2 at 0x21399000
s5pc1xx: 33554432 bytes system memory reserved for mfc at 0x2155b000
s5pc1xx: 3686400 bytes system memory reserpc1xx: 3145728 bytes system memory reserved for pmem_gpu0
s5pc1xx: 6291456 bytes system memory reserved for pmem_adsp at 0x24bdf000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
Kernel command line: root=/dev/mmcblk0p2 rw rootfstype=ext3 mem=384m init=/init  console=ttySAC0,11
Unknown boot option `androidboot.console=s3c2410_serial0': ignoring
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 384MB = 384MB total
Memory: 308736KB available (3684K code, 772K data, 164K init)
Calibrating delay loop... 665.19 BogoMIPS (lpj=1662976)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 520 bytes
S5PC1XX GPIO Driver Init
NET: Registered protocol family 16
arch/arm/mach-s5pc100/mach-hkdkc100.c : hkdkc100_machine_init (545) : Wifi&BT Power OFF!!
s5pc1xx Power Management init, (c) 2009 Samsung Electronics
s3c24xx-pwm s3c24xx-pwm.0: tin at 33375000, tdiv at 33375000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 33375000, tdiv at 33375000, tin=divclk, base 8
S5PC100: Initiall 24 DMA channels will be initialized.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
msgmni has been set to 603
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
s3cfb s3cfb: [fb0] dma: 0x37a00000, cpu: 0xff000000, size: 0x00096000
Console: switching to colour frame buffer device 40x30
GPIO-20 autorequested
GPIO-21 autorequested
power on sequence done...
display on sequence done...
s3cfb s3cfb: registered successfully
S3C PWM Driver, (c) 2006-2007 Samsung Electronics
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
s5pc100-uart.0: s3c2410_serial0 at MMIO 0xec000000 (irq = 16) is a S3C6400/10
s5pc100-uart.1: s3c2410_serial1 at MMIO 0xec000400 (irq = 20) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
Linux video capture interface: v2.00
S5PC100 MFC Driver, (c) 2009 Samsung Electronics
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1020100
G3D_RESERVED_MEM_SIZE : 32 MB
G3D_CHUNK_SIZE : 2 MB
G3D_CHUNK_NUM : 16
g3d is registered successfully!<4>Driver 'sd' needs updating - please use bus_type methods
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode) 
android init
android_bind
mass_storage_function_add
android_usb gadget: Number of LUNs=1
adb_function_add
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: hkc100-keypad as /class/input/input0
HardKernel-C100(HKC100) dev board keypad driver initialized!!
input: hkc100-touch as /class/input/input1
TOUCH SENSITIVITY : 0x16
TOUCH ID          : 0xC2
HKC100 TOUCH request_irq = 36
HardKernel-C100 touch driver initialized!! Ver 1.0
input: bma150-sensor as /class/input/input2
BMA150 Sensor I2C 3 Wire Mode [rd = 0x00] 
BMA150 Sensor Chip version [1.2]
BMA150 Sensor Chip ID [2] 
HardKernel-C100 BMA150 Sensor driver initialized!! Ver 1.0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: regi s3c2410-i2c.0: bus frequency set to 379 KHz
s3c2410-i2c s3c2410-i2c.0: i2c-0: S3C I2C adapter
max17040 0-0036: MAX17040 Fuel-Gauge Ver 02
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
cpuidle:re Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc0::
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc1::
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133500000 Hz)
s3c-sdhci s3c-sdhci.2: clock source 2: mmc_bus (44500000 Hz)
Registered led device: mmc2::
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Advanced L91 Audio Codec 0.2
WM8991 Control Interface : 2-Wire Mode, CSB Low
asoc: WM8991 ADC/DAC Primary <-> s5p-i2s mapping ok
Failed to add route LIN4->LIN34 PGA
ALSA device list:
  #0: odroid-c100 (WM8991)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ThumbEE CPU extension supported.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable inserted
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-08-14 14:37:09 UTC (1281796629)
Waiting 1sec before mounting root device...
mmc0: new SD card at address 9509
mmcblk0: mmc0:9509 SU02G 1.84 GiB 
 mmcblk0: p1 p2
mmc1: new high speed SDHC card at address b368
mmcblk1: mmc1:b368 SDC   7.45 GiB 
 mmcblk1: p1
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 164K
Warning: unable to open an initial console.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on mmcblk0p1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
enabling adb
adb_open
# warning: `rild' uses 32-bit capabilities (legacy support in use)
s3c-fimc s3c-fimc.0: set interface clock rate to 133000000